100-40 Series | .100 [2.54] Centers | .400 [10.16] Full Stroke

Designed for dual level, loaded board testing.

 
P/N
Cart

Pin Gauge


100-40 Series Pin Gauge

Mounting holes in AT7000, G10/FR4 or similar materials should be gauged at .0670/.0690 [1.702/1.753] using PG100 pin gauge.

 

Socket Installation Tool


100-40 Series Socket Installation Tool

Order the AT100-KIT or AT100M-KIT (metric) adjustable tool for mounting sockets at varying set heights.


100-40 Series Socket Installation Tool

Order the ITR100-FL or ITR100 SET .XXX. (Specify Height: .001 to .345 [0.03 to 8.76] to install 100-40 series sockets.


100-40 Series Socket Installation Tool

A replacement -TIP can be ordered when your used tool is damaged or worn.

 

Socket Extraction Tool


100-40 Series Socket Extraction Tool

Order the ETR100-KIT for removing a damaged socket from its mounting hole. The kit consists of one ETR100 socket extraction tool, one ITR100-FL (sockets must be flush before extraction).

The ETR100 socket extraction tool is also available separately. 

A replacement -TIP can be ordered when your used tool is damaged or worn.

 

Probe Installation Tool


100-40 Series Probe Installation Tool

Use the PT100/75 to install 100-40 series probes.

 

Probe Extraction Tool


100-40 Series Probe Extraction Tool

PERX75/100 tools allow easy removal of probes with headed tip styles.

A replacement -TIP can be ordered when your used tool is damaged or worn.

 

Damaged Probe Tube Extraction Tool


100-40 Series Damaged Probe Tube Extraction Tool

TERX75/100 tools are used to remove damaged probe tubes.

A replacement -TIP can be ordered when your used tool is damaged or worn.

 

Indicator Probe


100-40 Series Indicator Probe Tool

Use IP100-4010 or IP100-4040 to measure probe stroke in a test fixture (plunger remains at deflected position).

 

Socket Plug


100-40 Series Socket Plug Tool

Use the 100-SPR to plug a conventional 100-mil socket where a test point is no longer needed.



All specifications subject to change without notice. All dimensions are in [mm]. All spring forces are oz [gm].