IDO2 Series | Circular Connectors


 

IDO2 Series Circular Connectors

 
IDO2
 

Specifications

Mechanical IDO2 Specification Test Procedure
Connector Mating Force 3.5 lbs. max. EIA-364, TP 13
Connector Retention Force 20.0 lbs. min. EIA-364, TP 90
Contact Retention Force 5.0 lbs. min. per contact EIA-364, TP 29
Connector Mating Cycles 10,000 min. EIA-364, TP 9
Random Vibration 19.64 G (root mean square) EIA-364, TP 28; Test Condition V;
Mil-Std-1344, Method 2005
Mechanical Shock 50 G EIA-364, TP 20; Mil-Std-1344,
Method 3001
Electrical    
Current Rating See contact pattern EIA-364, TP 70
Low Level Contact Resistance See contact pattern EIA-364, TP 23; Mil-Std-1344,
Method 3002
Insulation Resistance > 10,000 MΩ EIA-364, TP 21; Mil-Std-1344,
Method 3003
Dielectric Withstanding Voltage See contact pattern EIA-364, TP 20; Mil-Std-1344,
Method 3001
Environment    
Protection Index IP50 IEC 60529
Operating Temperature -40°C to 85°C  
Materials  
Connector  
Molded Parts (except as indicated below) Polycarbonate (PC)
Cable Clamp Polyethersulfone (PES)
Bend Relief Thermoplastic Elastomer (TPE)
Mounting Nut Die Cast Zinc with Nickel Plating
Contacts  
Contact Wires & Spring Clips Beryllium Copper
All other parts High Conductivity Copper Alloys
Contact Plating
  • 50 μ-inch of gold plating over nickel on all sliding contact surfaces
  • 10 μ-inch of gold plating on all other surfaces
    (note the ends of contact wires and mounting clips are not plated)