Interface Probes - Teradyne/GenRad

 
P/N 100-PL
1241
Cart

Probe P/N 100-PL_1241

100-PL1241 Interface Probes by Teradyne/GenRad

Interface Probes

Interface Probes are used in testers for electromechanical contact between the fixture and tester. QA Technology has listed the part numbers that correspond with the applicable testers. These part numbers are QA’s recommended direct replacements.

Recommended QA Part Numbers

Teradyne/GenRad QA Probe Part Number
2270, 2271, 2272, 2282 (any model), 2283, 2284, 2286, 2287 built before 7/95 100-PLP1241S and/or 100-PLP1241S-B
For Applicable Socket, Click to Order P/N 100-SDN250R



 

100-PL_1241_ Specifications

Select Tube Material
Letter Material Average Resistance
P Nickel silver/ID precious metal clad < 20 mOhms
 G Nickel silver/ID OD gold plated < 25 mOhms
 N Nickel silver/No finish < 45 mOhms
Tip Style
Digit Material/Finish
41 Heat treated BeCu/plated gold over nickel
Select Spring Force
Letter Spring Force Preload .107 Stroke Material Cycle Life @ Stroke
 L Low 0.7 [20] 1.5 [43] SS 1M @ .107 [2.72]
 S Standard 1.7 [48] 3.5 [99] SS 1M @ .107 [2.72]
 H High 2.2 [62] 5.5 [156] MW 1M @ .107 [2.72]
 X Extra 3.0 [85] 8.0 [227] MW 1M @ .107 [2.72]
 U Ultra 4.5 [128] 10.0 [283] MW 250K @ .107 [2.72]
Select Option (if required).
Letter Description
 B Curved probe tube (pylon replacement)
 N No probe lubrication. Removing probe lubrication greatly reduces cycle life and should only be used in applications requiring operating temperatures below -55°C.
 

1Current Rating is affected by spring material and lubrication choices. Standard lubrication has a 204 ̊C maximum operating temperature limit.
Before using probes near these current limits, please refer to Current Carrying Capacity and Operating Temperature Application Notes.

All specifications subject to change without notice. All dimensions are in [mm]. All spring forces are oz [gm].