Interface Probes - Teradyne / GenRad 

 
P/N 100-PRG 24
Cart

Probe P/N 100-PRG24

100-PRG2441S Interface Probes by Teradyne/GenRad

Interface Probes

Interface Probes are used in testers for electromechanical contact between the fixture and tester. QA Technology has listed the part numbers that correspond with the applicable testers. These part numbers are QA’s recommended direct replacements.

Recommended Part Numbers

Teradyne/GenRad QA Probe/Socket Part Number
Tester model numbers ending in “L” (high density capacity) 100-PRG2441S and/or 100-PLP1541S
For Socket details, See 100-16 Series


 
Tube Material
Letter Material   Average Resistance
 G Nickel silver/ID OD gold plated   < 15 mOhms
Select your tip style. Standard material is heat-treated BeCu/plated gold over nickel.
Use the drop-down menu at right to filter your choices by target type.
Spring Force
Letter Spring Force Preload .107 Stroke Material Cycle Life @ Stroke
 S Standard 1.8 [51] 3.5 [99] SS 1M @ .200 [5.08]
 B High Preload 2.0 [57] 2.6 [74] SS 1M @ .200 [5.08]
Select Option (if required).
Letter Description
 B Curved probe tube (pylon replacement)
 N No probe lubrication. Removing probe lubrication greatly reduces cycle life and should only be used in applications requiring operating temperatures below -55°C.
 

1Current Rating is affected by spring material and lubrication choices. Standard lubrication has a 204 ̊C maximum operating temperature limit.
Before using probes near these current limits, please refer to Current Carrying Capacity and Operating Temperature Application Notes.

All specifications subject to change without notice. All dimensions are in inches [mm]. All spring forces in ounces [gms].