.031 [.800] Centers | Wireless Termination Pins

Designed for wireless testing.

 
Cart

31mil termination pins for loaded board testing

Double Ended Termination Pins

Double-ended termination pins allow construction of X Probe Socketless fixtures with far shorter signal path lengths than conventional wire wrap designs. The shorter path length allows better control of the signal from the tester circuits to the Unit Under Test (UUT). Note: Top test probe is not included with the double-ended termination and should be ordered separately.

Compatible probe series: X31-16, X31-25 and X31-40


Suggested Mounting Holes and Drill Sizes in AT7000, G10/FR4 or similar material should be gauged at:
Plates Hole Size Drill Size
Probe Plate .0250/.0260 [0.635/0.660] #71 or .65mm
Back Plate .0217/.0225 [0.551/0.572] #74 or .57mm
 
Termination Specifications:
Material Max Set Height Full Stroke Order your P/N
Tube: Nickel Silver/ID Precious Metal Clad.
Term & Tip: Heat tred BeCu/gold plated over nickel
.000 [0.00] .100 [2.54]
Tube: Nickel Silver/ID Precious Metal Clad.
Term & Tip: Heat tred BeCu/gold plated over nickel
.020 [0.51] .150 [3.81]
Spring force specifications
Part Number
Preload @Working Stroke Material Cycle Life @ Stroke
X31-TDS3-00 1.0 [28] 3.8 [108] SS 10K @ .075 [1.91]
X31-TDS3-02 1.0 [28] 3.8 [108] SS 10K @ .100 [2.54]
 

All specifications subject to change without notice. All dimensions are in [mm]. All spring forces are oz [gm]. US Patent No. 6,570,399 & 4,885,533.