X31-16 Series | .031 [.800] Centers | .160 [4.06] Full Stroke

Designed for loaded board testing.

 
Cart

Pin Gauge


X31-25 Series Pin Gauge

Mounting holes in AT7000, G10/FR4 or similar materials for the Probe should be gauged at .0250/.0260 [0.635/0.660] using PG-X31-P. Back Plate should be gauged at .0217/.0225 [0.551/0.572] using PG-X31-T.

 

Termination Installation Tool


X31-25 Series Termination Installation Tool

Order the ITRX31-FL or ITRX31 SET-.435, -.010, .010, .020, .030, .040 to install X31-25 terminations.

A replacement -TIP can be ordered when your used tool is damaged or worn.


Termination Extraction Tool


X31-25 Series Termination Extraction Tool

The ETRX31 for removing a damaged termination from its mounting hole when the Probe Plate is removed.

To properly extract a termination from your fixture, we recommend that it first be mounted Flush. For your convenience, we offer an ETRX31-KIT which includes an   ETRX31 & ITRX31-FL.

Order the ETRX31-EXT when the Probe Plate is installed.


A replacement-TIP  can be ordered when your used tool is damaged or worn.

Probe Installation Tool


X31-25 Series Probe Installation Tool

Use the PT50/39 to install X31-16 series probes.

 

Damaged Probe Tube Extraction Tool


X31-25 Series Damaged Probe Tube Extraction Tool

The TERX31/039 is for removing damaged probe tubes without damaging the fixture.

A replacement -TIP can be ordered when your used tool is damaged or worn.

 

Wire Grip Installation Tool


X31-25 Series Wire Grip Installation Tool

Order the GTR31 to install the WG31 Wire Grip sleeve.

A replacement -TIP can be ordered when your used tool is damaged or worn.

 

Wire Strippers


X31-25 Series Wire Strippers

Use WS30 (for 30AWG wire) Wire stripping tool to strip a length of .120 [3.05] required for use with wire plugs, jacks or grips.

 


All specifications subject to change without notice. All dimensions are in [mm]. All spring forces are oz [gm].