X39-25 Series | .039 [1.00] Centers | .250 [6.35] Full Stroke

Designed for loaded board testing.

 
Cart

Pin Gauge


X39-25 Series Pin Gauge

Mounting holes in AT7000, G10/FR4 or similar materials for the Probe Plate and Back Plate (wired and wireless) should be gauged at .0315/.0325 [0.800/0.826] using PG-X39 pin gauge.

 

Termination Installation Tool


X39-25 Series Termination Installation Tool X39-25 Series Termination Installation Tool

To install X39-16 termination pins, order the ITRX39-FL

Specify Height (positive or negative):

ITRX39 SET .XXX : -.150 to .100 [-3.81 to 2.54]

ITRX39E SET .XXX : -.435 to -.150 [-11.05 to -3.81]


A replacement -TIP can be ordered when your used tool is damaged or worn.

 

Termination Extraction Tool


X39-25 Series Termination Extraction Tool
X39-25 Series Termination Extraction Tool

The ETRX39 for removing a damaged termination from its mounting hole when the Probe & Spacer Plates are removed.

Order the ETRX39E when the Probe & Spacer Plates are installed.

To properly extract a termination from your fixture, we recommend that it first be mounted Flush. For your convenience, we offer an ETRX39-KIT which includes one ETRX39 and one ITRX39-FL.


A replacement -TIP, can be ordered when your used tool is damaged or worn.

 

Probe Installation Tool


X39-25 Series Probe Installation Tool

Use the PT50/39 to install X39-25 series probes.

 

Probe Extraction Tool


X39-25 Series Probe Extraction Tool

PERX39/050 tools allow easy removal of probes with headed tip styles.

A replacement -TIP can be ordered when your used tool is damaged or worn.


 

Damaged Probe Tube Extraction Tool


X39-25 Series Damaged Probe Tube Extraction Tool

The TERX39/050 for removing damaged probe tubes without damaging the fixture.

A replacement -TIP can be ordered when your used tool is damaged or worn.

 

Wire Grip Installation Tool


X39-25 Series Wire Grip Installation Tool

Order the GTR50 tool to install wire grip sleeve onto the termination pin.

A replacement -TIP can be ordered when your used tool is damaged or worn.

 

Wire Jack Installation Tools


X39-25 Series Wire Jack Installation Tool

Order the JTR2830 tool to install the wire jacks onto the termination pin.

A replacement -TIP can be ordered when your used tool is damaged or worn.

 

Wire Strippers


X39-25 Series Wire Strippers

WS28 or WS30 Wire stripping tools, preset to strip a length of .120 [3.05] for use with wire plugs, jacks or grips.

 

Indicator Probes


X39-25 Series Indicator Probes

Use IPX39-2540 to measure probe stroke in a test fixture (plunger remains at deflected position).

 

Wire Crimper

X39-25 Series Wire Crimper Tool

Order the CR2830, an air actuated Wire Crimper Tool, to permanently attach customer supplied wire to Wire Jacks.

 


All specifications subject to change without notice. All dimensions are in [mm]. All spring forces are oz [gm].