X39-40 Series | .039 [1.00] Centers | .400 [10.16] Full Stroke

Designed for dual level, loaded board testing.

 
Cart

Pin Gauge


X39-40 Series Pin Gauge

Mounting holes in AT7000, G10/FR4 or similar materials for the Probe Plate and Back Plate (wired and wireless) should be gauged at .0315/.0325 [0.800/0.826] diameter using PG-X39 pin gauge.

 

Termination Installation Tool


X39-40 Series Termination Installation Tool

Order the ITRX39-FL or ITRX39 SET .XXX Specify Height: -.040 to .100 [-1.02 to 2.54] to install X39-25 terminations.


X39-40 Series Termination Installation Tool

A replaceable tip, ITRX39-FL-TIP or ITRX39-TIP Specify Height: -.040 to .100 [-1.02 to 2.54], can be ordered when your used tool is damaged or worn.

 

Termination Extraction Tool


X39-40 Series Termination Extraction Tool

The ETRX39 for removing a damaged termination from its mounting hole when the Probe and optional Spacer Plates are removed.

To properly extract a termination from your fixture, we recommend that it first be mounted Flush. For your convenience, we offer an ETRX39-KIT which includes one ETRX39 and one ITRX39-FL.

Order the ETRX39-EXT when the Probe and optional Spacer Plates are installed.


X39-40 Series Termination Extraction Tool Replaceable Tip

A replaceable tip, ETRX39-TIP or ETRX39-EXT-TIP can be ordered when your used tool is damaged or worn.

 

Probe Installation Tool


X39-40 Series Probe Installation Tool

Use the PT50/39 to install X39-40 series probes.

 

Probe Extraction Tool


X39-40 Series Probe Extraction Tool

PERX39/050 tools allow easy removal of probes with headed tip styles.

A replaceable tip, PERX39/050-TIP can be ordered when your used tool is damaged or worn.

 

Damaged Probe Tube Extraction Tool


X39-40 Series Damaged Probe Tube Extraction Tool

The TERX39/050 for removing damaged probe tubes without damaging the fixture.

A replaceable tip, TERX39/050-TIP can be ordered when your used tool is damaged or worn.

 

Wire Grip Installation Tool


X39-40 Series Wire Grip Installation Tool

Order the GTR50 tool to install wire grip sleeve onto the termination.

A replaceable tip, GTR50-TIP can be ordered when your used tool is damaged or worn.

 

Wire Jack Installation Tool


X39-40 Series Wire Jack Installation Tool

Order the JTR2830 to install the wire jacks onto the termination.

A replaceable tip, JTR2830-TIP can be ordered when your used tool is damaged or worn.

 

Wire Strippers


X39-40 Series Wire Strippers

WS28 or WS30 tools are preset to strip a length of .120 [3.05] for use with wire plugs, jacks or grips.

 

 

Wire Crimper

X39-40 Series Wire Crimper Tool

Order the CR2830, an air actuated Wire Crimper Tool, to permanently attach customer supplied wire to Wire Jacks.



All specifications subject to change without notice. All dimensions are in [mm]. All spring forces are oz [gm].