X50-16 Series | .050 [1.27] Centers | .160 [4.06] Full Stroke

Designed for loaded board testing.

 
Cart

Pin Gauge


X50-25 Series Pin Gauge

Mounting holes in AT7000, G10/FR4 or similar materials for the Probe Plate should be gauged at .0415/.0430 [1.054/1.092] using PG-X50-P pin gauge.

For Back Plate (wired and wireless) should be gauged at .0380/.0390 [0.965/0.990] using PG-X50-T pin gauge.

 

Termination Installation Tool


X50-25 Series Termination Installation Tool X50-25 Series Termination Installation Tool

To install X50-16 termination pins, order the ITRX50-FL

Specify Height (positive or negative):

ITRX50 SET .XXX : -.150 to .140 [-3.81 to 3.56]

ITRX50E SET .XXX : -.450 to -.150 [-11.43 to -3.81]


A replacement-TIP can be ordered when your used tool is damaged or worn.

Termination Extraction Tool


X50-25 Series Termination Extraction Tool
X50-25 Series Termination Extraction Tool Replaceable Tip

The ETRX50 for removing a damaged termination from its mounting hole when the Probe Plate is removed.

To properly extract a termination from your fixture, we recommend that it first be mounted Flush. For your convenience, we offer an ETRX50-KIT which includes one ETRX50 and one ITRX50-FL.

Order the ETRX50-EXT when the Probe Plate is installed.


A replacement -TIP can be ordered when your used tool is damaged or worn.

 

Probe Installation Tool


X50-25 Series Probe Installation Tool

Use the PT100/75 to install X50-16 series probes.

 

Damaged Probe Tube Extraction Tool


X50-25 Series Damaged Probe Tube Extraction Tool

The TERX50/075 is for removing damaged probe tubes without damaging the fixture.

A replacement -TIP can be ordered when your used tool is damaged or worn.

 

Wire Jack Installation Tool


X50-25 Series Wire Jack Installation Tool

Order the JTR2830 to install the wire jacks.

A replacement -TIP can be ordered when your used tool is damaged or worn.

 

Indicator Probes


Use IPX50-16S43P to measure probe stroke in a test fixture with holes, pads or vias, or IPX50-16S44H with leads or posts (plunger remains at deflected position).

 

Wire Crimper

X39-40 Series Wire Crimper Tool

Order the CR2830, an air actuated Wire Crimper Tool, to permanently attach customer supplied wire to Wire Jacks.

 


All specifications subject to change without notice. All dimensions are in [mm]. All spring forces are oz [gm].