X75-16 Series | .075 [1.91] Centers | .160 [4.06] Full Stroke

Designed for loaded board testing.

 
Cart

Pin Gauge


X75-25 Series Pin Gauge

Mounting holes in AT7000, G10/FR4 or similar materials for the Probe Plate should be gauged at .0545/.0560 [1.384/1.422] using PG-X75A-P pin gauge

For the Back Plate (wired) should be gauged at .0515/0525 [1.308/1.333] using PG-X75A-T pin gauge.

For the Back Plate (wireless) should be gauged at .0380/.0390[0.965/0.990] using PG-X50-T pin gauge.

 

Termination Installation Tool


X75-25 Series Termination Installation Tool X75-25 Series Termination Installation Tool

To install X75-16 termination pins, order the ITRX75-FL or

Specify Height (positive or negative):

ITRX75 SET .XXX : -.150 to .140 [-3.81 to 3.56]

ITRX75E SET .XXX : -.450 to -.150 [-11.43 to -3.81]


A replacement -TIP can be ordered when your used tool is damaged or worn.

Termination Extraction Tool


X75-25 Series Termination Extraction Tool
X75-25 Series Termination Extraction Tool Replaceable Tip

The ETRX75 for removing a damaged termination from its mounting hole when the Probe Plate is removed.

To properly extract a termination from your fixture, we recommend that it first be mounted Flush. For your convenience, we offer an ETRX75-KIT which includes one ETRX75 and one ITRX75-FL.

Order the ETRX75-EXT when the Probe Plate is installed.


A replacement -TIP can be ordered when your used tool is damaged or worn.

 

Probe Installation Tool


X75-25 Series Probe Installation Tool

Use the PT100/75 to install X75-16 series probes.

 
 

Damaged Probe Tube Extraction Tool


X75-25 Series Damaged Probe Tube Extraction Tool

The TERX75/100 is for removing damaged probe tubes without damaging the fixture.

A replacement -TIP can be ordered when your used tool is damaged or worn.

 

Indicator Probes


Use IPX75-16S43P to measure probe stroke in a test fixture with holes, pads or vias, or IPX75-16S44H with leads or posts (plunger remains at deflected position).

 


All specifications subject to change without notice. All dimensions are in [mm]. All spring forces are oz [gm].