X75-40 Series | .075 [1.91] Centers | .400 [10.16] Full Stroke

Designed for dual level, loaded board testing.

 
Cart

Pin Gauge


X75-40 Series Pin Gauge

Mounting holes in AT7000, G10/FR4 or similar materials for the Probe Plate should be gauged at .0545/.0560 [1.384/1.422] using PG-X75A-P pin gauge.

For the Back Plate (wired) should be gauged at .0515/.0525 [1.308/1.333] using PG-X75A-T pin gauge.

For the Back Plate (wireless) should be gauged at .0380/.0390 [0.965/0.990] using PG-X50T pin gauge.

 

Termination Installation Tool


X75-40 Series Termination Installation Tool

Order the ITRX75-FL or ITRX75 SET .XXX Specify Height: 001 to .140 [0.03 to 3.56] to install X75-40 terminations.


X75-40 Series Termination Installation Tool

A replaceable tip, ITRX75-FL-TIP or ITRX75-TIP Specify Height: 001 to .140 [0.03 to 3.56], can be ordered when your used tool is damaged or worn.

 

Termination Extraction Tool


X75-40 Series Termination Extraction Tool

The ETRX75 for removing a damaged termination from its mounting hole when the Probe and optional Spacer Plates are removed.

To properly extract a termination from your fixture, we recommend that it first be mounted Flush. For your convenience, we offer an ETRX75-KIT which includes one ETRX75 and one ITRX75-FL.

Order the ETRX75-EXT when the Probe and optional Spacer Plates are installed.


X75-40 Series Termination Extraction Tool Replaceable Tip

A replaceable tip, ETRX75-TIP or ETRX75-EXT-TIP can be ordered when your used tool is damaged or worn.

 

Probe Installation Tool


X75-40 Series Probe Installation Tool

Use the PT100/75 to install X75-40 series probes.

 

Probe Extraction Tool


X75-40 Series Probe Extraction Tool

PERX75/100 tools allow easy removal of probes with headed tip styles.

A replaceable tip, PERX75/100-TIP can be ordered when your used tool is damaged or worn.

 

Damaged Probe Tube Extraction Tool


X75-40 Series Damaged Probe Tube Extraction Tool

Order the TERX75/100 for removing damaged probe tubes without damaging the fixture. A replaceable tip, TERX75/100-TIP can be ordered when your used tool is damaged or worn.

 

Indicator Probes


X75-40 Series Indicator Probes

Use IPX75-4010 or IPX75-4040 to measure probe stroke in a test fixture (plunger remains at deflected position).

 


All specifications subject to change without notice. All dimensions are in [mm]. All spring forces are oz [gm].